Tililt

Printable motor efficiency class chart (IE1–IE4)

Minimum efficiency for IE1 to IE4 at every standard rating, and which class the EU lets you buy now. One sheet, fits A4 and US Letter.

Download Excel (.xlsx) Print, or choose “Save as PDF” in the print dialog. The Excel file has every table as its own sortable tab.

Motor efficiency classes IE1–IE4

IEC 60034-30-1 minimum efficiency · 0.75–1000 kW · EU Ecodesign rules

tililt.com

Minimum efficiency by class — IEC 60034-30-1, 50 Hz (%)

kWIE1 4pIE2 4pIE3 4pIE4 4pIE3 2pIE3 6p
0.7572.179.682.585.780.778.9
1.175.081.484.187.282.781.0
1.577.282.885.388.284.282.5
2.279.784.386.789.585.984.3
381.585.587.790.487.185.6
483.186.688.691.188.186.8
5.584.787.789.691.989.288.0
7.586.088.790.492.690.189.1
1187.689.891.493.391.290.3
1588.790.692.193.991.991.2
18.589.391.292.694.292.491.7
2289.991.693.094.592.792.2
3090.792.393.694.993.392.9
3791.292.793.995.293.793.3
4591.793.194.295.494.093.7
5592.193.594.695.794.394.1
7592.794.095.096.094.794.6
9093.094.295.296.195.094.9
11093.394.595.496.395.295.1
13293.594.795.696.495.495.4
16093.894.995.896.695.695.6
200+94.095.196.096.795.895.8

EU Ecodesign — what a new motor must be

OutputMinimumApplies to
0.12–0.75 kWIE22, 4, 6, 8-pole — since 1 Jul 2021
0.75–1000 kWIE32, 4, 6, 8-pole — since 1 Jul 2021
75–200 kWIE42, 4, 6-pole — since 1 Jul 2023
Ex eb motorsIE20.12–1000 kW — since 1 Jul 2023

IE1 standard · IE2 high · IE3 premium · IE4 super premium. NEMA Premium in North America sits at about IE3. One class up is 1–3 points of efficiency: on an 11 kW motor running 6,000 h a year, IE2 → IE3 saves about 1,300 kWh.

Minimum nominal full-load efficiency for the class; a motor's catalogue figure is usually above it. 200+ = 200 kW up to 1000 kW. Regulation (EU) 2019/1781 sets which class may be sold; it has exemptions — check it before replacing a motor like for like.

Get the next chart before it's on the site

The Shop Sheet, once a month: one new printable chart, and one standards gotcha that catches people out — the kind of wrong number a forum thread or an AI answer gives with total confidence. No sales emails.

More printable charts

Tap Drill ChartEvery common metric, UNC and UNF thread with its tap drill and clearance hole. The one for the wall above the drill press.Drill Size ChartAll 163 number, letter and fractional drills in one ascending run, with decimal inch, millimetres and the tap each one drills for.Bolt Torque ChartTightening torque for metric property classes and SAE grades, with the multiplier for oiled and anti-seize threads.Spanner & Allen Key ChartFor each bolt: the spanner or socket, the Allen key for its cap screw, the tap drill and the clearance hole.Wire Size ChartAWG ampacity at 60, 75 and 90 °C, and the copper size for any load and run length with voltage drop taken into account.Wire Ampacity Derating ChartHow far to derate copper for hot rooms and full conduits: temperature factors, conductor-count factors and the derated amps for every size from 14 AWG to 500 kcmil.Bearing Size ChartEvery common deep-groove ball bearing from 604 to 6320 by bore code and series, with what 2RS, ZZ and C3 mean.IEC Motor Frame ChartEvery IEC frame from 63 to 355: shaft height, foot hole spacing, shaft size and the kW normally built on it, plus B3/B5/B14.NEMA Motor Frame ChartNEMA T frames from 56 to 449T with shaft height, foot holes, shaft size and typical HP — and what C, TS and JM mean.Motor Full-Load Current ChartFull-load amps for three-phase motors at 208 to 575 V with the copper size for each, and typical IEC amps at 400 V.IE3/IE4 Motor Compliance Chart (EU 2026)Which IE class a new motor must be in the EU, whether an old IE1 or IE2 motor may keep running or be rewound, and what an upgrade saves — with a checker for your nameplate.