What torque does a 5/16-18 UNC bolt take?
Answer
A 5/16-18 UNC in SAE Grade 5 takes 23.6 N·m — 17.4 lb·ft — dry, tightened to 75% of proof load. Oiled, it is far less.
How it is worked out
- Torque is only a proxy for tension
T = K × D × F - Tensile stress area of this bolt
33.83 mm² - Target 75% of proof load
14.87 kN of clamp force in SAE Grade 5 - Multiply out
0.20 × 0.0079 m × 14,868 N = 23.6 N·m
T = K · D · F — and 85–90% of that torque is spent on friction
Worth knowing
- Dry, as received — K 0.20
- SAE Grade 5 23.6 N·m (17.4 lb·ft) · SAE Grade 8 33.3 N·m (24.6 lb·ft) · SAE Grade 2 15.3 N·m (11.3 lb·ft)
- Lightly oiled — K 0.15
- SAE Grade 5 17.7 N·m · SAE Grade 8 25 N·m · SAE Grade 2 11.5 N·m
- Anti-seize or moly — K 0.12
- SAE Grade 5 14.2 N·m · SAE Grade 8 20 N·m · SAE Grade 2 9.2 N·m
- Why lubrication changes it so violently
- Almost all the torque goes into friction rather than tension. Halving the friction roughly doubles the preload for the same torque — which is how a bolt gets snapped with a correctly set wrench and a dry-torque chart.
- Single shear capacity
- 16.8 kN in SAE Grade 5
- Can it be reused
- At 75% of proof, yes — the bolt stayed elastic. Torque-to-yield fasteners have already stretched permanently and cannot.
- The thread it goes into
- This sizes the bolt, not the hole. A steel bolt in aluminium strips the aluminium first unless engagement is one and a half diameters or more.
Every grade at this size
Nearby sizes
Do it with your own numbers
This page answers one specific question. The Bolt Torque Calculator takes any values you like and answers as you type — in your browser, so nothing you enter is sent anywhere.